Keeping your dishwasher filter clean is an important part of maintaining the efficiency and effectiveness of your Samsung dishwasher.
Over time, food particles and other debris can build up in the filter, leading to a clogged or dirty filter that can cause your dishwasher to work poorly.
Fortunately, cleaning the filter is a simple task that you can do on your own with just a few basic steps.
Simply Clean Your Samsung Dishwasher Filter
- Dishwashing Soap or Vinegar
- Soft-Bristled Brush or Toothbrush
- Clean Cloth or Paper Towels
- Access to Warm Water
- Optional: Gloves to Protect Your Hands
Here are the step-by-step instructions for cleaning your Samsung dishwasher filter:
Total Time: 30 minutes
Turn Off the Dishwasher
Before cleaning the filter, you must turn off the dishwasher and unplug it from the electrical socket. This will ensure your safety while you clean the filter.
Locate the Filter
The filter is usually located at the bottom of your Samsung dishwasher tub, under the lower spray arm. It may be round or rectangular in shape, and it will be marked with a “Filter” or “Clean” label.
Remove the Filter
To remove the filter, turn it clockwise or counterclockwise, depending on the type of filter you have. Some filters have a tab or handle that you can pull to remove them. Be gentle, as you don’t want to damage the filter or the dishwasher.
Soak the Filter
Fill a sink or bucket with warm water and add a few drops of dishwashing soap or vinegar. Place the filter in the water and let it soak for 10-15 minutes. This will help to loosen any debris or food particles that may have accumulated in the filter.
Scrub the Filter
After soaking, use a soft-bristled brush or toothbrush to gently scrub the filter. Pay special attention to the mesh screen and any crevices or corners where dirt and debris may be trapped.
Rinse the Filter
Rinse the filter under warm running water to remove any remaining dirt or soap. Use a clean cloth or paper towels to dry the filter thoroughly.
Reinstall the Filter
Once the filter is clean and dry, reinsert it into your Samsung dishwasher. Turn it clockwise or counterclockwise to lock it in place, and make sure it is securely fastened.
Run a Test Cycle
To ensure that the filter is working properly, run a test cycle with a small load of dishes. Check the filter again after the cycle is complete to make sure it is still clean and free of debris.
That’s it! By keeping your filter clean, you’ll help to ensure that your dishwasher runs smoothly, giving you clean dishes every time.
Few Tips for Your Samsung Dishwasher Filter
Following these tips, you’ll be able to keep your Samsung dishwasher filter clean and working effectively.
Use the Right Cleaning Products
While dishwashing soap and vinegar are both effective for cleaning your Samsung dishwasher filter, avoid using harsh chemicals or abrasive cleaners, as they can damage the filter or the dishwasher itself.
If you have sensitive skin or are concerned about touching dirty filter parts, consider wearing gloves while cleaning your filter. This will help protect your hands and keep them clean.
Inspect the Filter Regularly
While you’re cleaning the filter, take a few moments to inspect it for any signs of damage or wear. If you notice any cracks, holes, or other damage, it may be time to replace the filter.
Frequently Asked Questions
Here are some frequently asked questions and their responses regarding cleaning your Samsung dishwasher filter!
It’s important to clean the filter in your Samsung dishwasher regularly to ensure it functions properly and effectively. As a general rule of thumb, it’s a good idea to clean the filter at least once a month.
However, If you use your dishwasher frequently or wash dishes that have a lot of food debris, you may need to clean the filter more often.
No, you should not put the Samsung dishwasher filter in the dishwasher to clean it. The filter is not designed to be cleaned in the dishwasher and doing so can cause damage to the filter, the dishwasher, or both.
The filter always should be cleaned manually by hand.