How to Fix Your Whirlpool Dishwasher That Won't Start

A dishwasher is a convenient appliance that makes our lives much easier by saving time and effort in cleaning dishes. However, it can be frustrating when it fails to start.

If you are facing a problem with your Whirlpool dishwasher not starting, don’t worry, there are some simple troubleshooting steps that you can take before calling in a professional.

In this article, I will guide you through a step-by-step process to troubleshoot and fix your Whirlpool dishwasher.

Step 1: Check the Power Source

Ensure that your Whirlpool dishwasher is properly plugged into an electrical outlet and that the outlet is receiving power. If the outlet is controlled by a switch, make sure the switch is turned on.

Step 2: Check the Circuit Breaker

If the power source is okay, check the circuit breaker or fuse box. Make sure the circuit breaker or fuse that controls your Whirlpool dishwasher is not tripped or blown. Reset or replace the circuit breaker or fuse if necessary.

Step 3: Check the Door Latch

If the door latch isn’t fully engaged, your Whirlpool dishwasher won’t start. Make sure the door is closed and latched securely. If the door latch is broken or damaged, it may need to be replaced.

Step 4: Check the Control Panel

If the control panel is not responding when you press the buttons, it may be locked. Check your owner’s manual for instructions on how to unlock the control panel. If the control panel is still unresponsive, it may need to be replaced.

Step 5: Check the Dishwasher Cycle

Sometimes the dishwasher may not start if it’s in the middle of a cycle. To fix this problem, cancel the current cycle by pressing the Cancel button, and then try to start a new cycle.

Step 6: Check the Cycle Selector Switch

If the dishwasher won’t start or the selected cycle won’t start, check the cycle selector switch. Make sure it is properly aligned with the selected cycle and is not stuck or damaged.

Step 7: Check the Float Switch

The float switch is a safety feature that prevents your Whirlpool dishwasher from overfilling with water. If the float switch is stuck or damaged, it can prevent the dishwasher from starting. Check the float switch and make sure it moves freely.

Step 8: Check the Spray Arms

Sometimes, a clogged or dirty spray arm can prevent your Whirlpool dishwasher from starting. If the spray arm cannot rotate, it won’t distribute water effectively, and the dishwasher may not start.

Remove the spray arms and clean them thoroughly with warm, soapy water. Make sure that all the holes are clear of debris and reinstall the spray arms.

Step 9: Check the Timer

If your Whirlpool dishwasher is not starting or advancing through the cycles, the timer may be faulty. You can test the timer with a multimeter to see if it is sending power to the motor and other components.

Step 10: Check the Dishwasher Motor

If all the above steps fail, then your Whirlpool dishwasher motor might be the issue. If the motor is faulty, the dishwasher will not start.

To check the motor, you will need to remove your dishwasher’s lower access panel. Look for any broken or damaged wires, and make sure that the motor is not blocked or jammed. If you find any damage, you will need to replace the motor.

Call a Professional

If you have tried all the above steps and your Whirlpool dishwasher still does not start, it’s time to call in a professional. A qualified technician will be able to diagnose the problem and repair it quickly.

Conclusion

Your Whirlpool dishwasher not starting can be a frustrating experience, but it’s important not to panic. I hope that by following the above troubleshooting steps, you can identify and fix the problem.

With a little patience and determination, you’ll have your dishwasher up and running again in no time!

Share it: